FLEX 6600M


Nouveau produit

FLEX-6600M SDR Transceiver

Disponibilité: Q2 2024

Plus de détails

5'399.00 CHF TTC

En savoir plus

FLEX-6600 for the Serious Amateur

Both the FLEX-6600™ and FLEX-6600M™ offer the ultimate performance direct sampling SDR technology and the best value for the serious HF/6m operator.
The FLEX-6600 model is designed for the Ham who wants to operate the radio exclusively as a server from PC, laptop, Maestro, Mac, or iOS clients – whether local or remote.
Both models share the same game changing band awareness, industry leading phase noise performance/ receiver dynamic range, and brick wall filters to give you the advantage in the most competitive DXing or contesting activities while maximizing your fun in casual operations.
With a PC, laptop, or Mac client, you can utilize up to four 14 MHz spectrum/waterfall displays and independent band/ mode receivers to revolutionize your view of the bands, especially on digital modes.

Contest grade filters, ultra low spurious emissions, and the ability to operate full duplex cross band on two antennas let you transmit on one band while receiving on another – no external equipment required.
Even switch to synchronous diversity reception when needed to help you pick out the weak ones in the midst of QRM.
By adding FlexRadio’s new PowerGenius XL LDMOS solid state amplifier a complete legal limit, all mode SO2R station is now practical with one radio, one amp and only three interconnect cables – half the cost and none of the complexity.

The FLEX-6600M places the most used controls right at your fingertips.
Controls are labeled for intuitive operation and designed to minimize hand motion for the most common operations.
Occasionally used controls are easily accessible on the large touch screen display bypassing the complexity of multi-function buttons and multi-level menus found on other transceivers.
Like modern smartphones and tablets, capacitive touch control is provided on the large LCD display for intuitive pan, zoom, tune, and menu operation.

The FLEX-6600M controls are designed to provide maximum tempo in the most demanding applications including SO2R, Run, S&P, and Multi-op contesting.

FLEX-6600 Feature Highlights

Native Remote Operation: Using Maestro, PC, Laptop, iPad or iPhone
    SDR Architecture: Direct Sampling
    Independent High Performance Receivers: Four (4)
    Reciprocal Mixing Dynamic Range (RMDR): 116dB
    Spectral Capture Units (digitizers): Two (2)
    Diversity Reception Capable using Seperate Antennas: Yes
    Single Operator Two Radios (SO2R) using one FLEX-6600: Yes
    Contest Grade Preselectors: 7th Order on contest bands; 3rd order on remaining bands
    Maximum Panadapter Bandwidth: 14 MHz
    Radio Control Surfaces: Ergonomic tactile controls with touch screen interface
    Integrated Display: 8-inch 1920x1200 IPS Display
    External Display: 1920x1200 WUXGA via HDMI interface
    Antenna Connectors: SO-239x2; XVTR-BNCx2, RX-IN-BNCx2
    Wideband Frequency Coverage: 30 kHz - 54 MHz
    Transmit Frequency Coverage: 160-6m amateur bands, 100W nominal output
    Transverter IF Frequency Coverage: 100 kHz - 54 MHz
    Full Duplex Operation: Yes
    Digital Audio Exchange (DAX) Channels: Four (4)
    DAX IQ Channels/Bandwidth per Channel (DAXIQ): Four (4)

Receiver Specifications

    Receiver Architecture: Direct Digital Sampling
    Spectral Capture Units (digitizers): Two (2)
    Maximum Slice Receivers: Four (4)
    ADC Resolution: 16-bits
    ADC Sampling Rate: 245.76 Msps
    Wideband Frequency Coverage: 30 kHz - 54 MHz
    DAX IQ Channels / Bandwidth Per Channel: Four (4)
    DAX Audio Channels: Four (4)
    Amateur Band Preselector Coverage: 7th order on contest bands; 3rd order on remaining
    1/2 kHz Reciprocal Mixing Dynamic Range (RMDR): 110/116 dB

Spectrum/Waterfall Display Specifications

    Maximum High Resolution Spectrum Displays: Four (4)
    Panadapter Bandwidth: 1.2 kHz - 14 MHz
    Spectrum Dynamic Range (max zoom): > 155 dB
    Spectrum Resolution Bandwidth (min): 1.6 Hz
    Integrated Touch Panel Display Size (diagonal)1: 8" (20.3 cm)
    Integrated Display Resolution1: 1920x1200
    External Display Resolution/Connection1: 1920x1200/HDMI

Transmitter Specifications

    Transmitter Architecture: Direct Digital Up-conversion
    Modulation System: Digital Low Power at Carrier Frequency
    RF Output Power: 1-100W nominal SSB, CW, FM, RTTY, Digital; 1-25W nominal AM
    Amateur Band Coverage at Rated Power Output: 160m – 6m
    Transverter IF Output Power: +0 dBm Typical; +10 dBm max
    Transverter IF Frequency Coverage: 100 kHz - 54 MHz
    DAX Transmit Channel: Yes
    Harmonic Suppression: < -60 dBc typical
    Transmit Bandwidth: Default 100-2900 Hz (Variable 50-10000 Hz)
    Microphone Connector: Pseudo Balanced 1/8" TRS
    Microphone Impedance: 600 Ohms Nominal (200-10kO)

Integrated Antenna Tuner Specifications

    Matching Range 80m - 10m: Optional, 8.3 Ohms - 300 Ohms
    Matching Range 160 and 6m: Optional, 16.7 Ohms - 150 Ohms

General Specifications

    USB 2.0 Ports (peripheral control): Two (2)
    Internal 10 MHz Reference Clock Stability: 0.5ppm TCXO (0-50C)
    Emission Modes: USB, LSB, CW, RTTY2, AM, Synchronous AM, FM, NFM, DFM, FreeDV2
    Frequency Resolution: 1 Hz min.
    Antenna Connectors: SO-239x2, BNC XVTRx2, BNC RX-INx2
    Antenna Impedance (w/o tuner): 50 Ohm Unbalanced


    Power Supply Requirements: +13.8V DC nominal ±15%
    Current Drain (Receive/Transmit Max): 2.0A / 23A @ 13.8V


    Height: 6.74" (17.1 cm) with feet
    Width: 14.0" (35. cm)
    Depth: 13.25" (33.7 cm)
    Operating Temperature: 0 to +50 degrees C; +32 to +122 degrees F


    GPS Disciplined Oscillator; 5x10-12 over 24 hours
    MARS/CAP Coverage Filter Bank
    ThumbDV module for D-Star mode

Specifications subject to change without notice.


Aucun avis n'a été publié pour le moment.

Donnez votre avis

FLEX 6600M

FLEX 6600M

FLEX-6600M SDR Transceiver

Disponibilité: Q2 2024