Console Maestro pour la série des FLEX-6000

Le FlexRadio Maestro™ est une console de contrôle plug-and-play permettant l'utilisation d'un émetteur-récepteur FLEX-6000  sans avoir besoin d'un PC traditionnel. Que vous soyez opérateur passionné par les concours, un chasseur de DX , un amoureux des discussions entre amis,ou si vous aimez juste de «jouer la radio," Maestro est plaisant et facile à utiliser. Maestro combine harmonieusement un écran tactile haute définition de 8 pouces de concert avec des commandes ergonomiques pour améliorer son utilisation et maximiser l'efficacité du flux de travail dans pratiquement toutes les applications SmartSDR ™.

Maestro places the most frequently used radio controls directly at your fingertips.  Controls are labeled for intuitive operation and designed to minimize hand motion for the most common operations.  Occasionally used controls are easily accessible on the large touch screen display bypassing the complexity of multi-function buttons and multi-level menus found on most transceivers.  FlexRadio continues to set the standard for high resolution, real time spectral display in amateur radio transceivers with Maestro, extending that same “HD visual radio” capability from the PC based SmartSDR for Windows™ to the 8 inch touch screen format. Like modern phones and tablets, capacitive touch control is provided on the large LCD display for intuitive pan, zoom, tune, and menu operation.

Ever wish you could monitor the bands or work DX from the comfort of your living room or out on the patio?  Its sleek, lightweight design makes it easy to carry, pack or go mobile.  Off the shelf VESA and VESA to RAM^® adapters provide a wealth of mounting options.  An optional battery pack with WiFi connectivity even lets you operate completely untethered.  Just connect Maestro using WiFi, through your local area network (LAN) or directly to any FLEX-6300, FLEX-6500 or FLEX-6700 transceiver and you are ready to operate.

Communications Interfaces

• WiFi: Dual-band 2x2 802.11a/b/g/n
• Ethernet: 10/100 Mbps
• Bluetooth^®: Version 4.0

Input/Output

• Microphone 1: Pseudo-balanced 8-pin RJ-45, dynamic or electret compatible (Same “Yaesu type” pinout as FLEX-1500 and FLEX-3000)
• Microphone 2: Pseudo-balanced ⅛” (3.5mm) TRS, dynamic or electret compatible
• Microphone Impedance: 600 Ohms Nominal (200-10kΩ)
• Headphone: Stereo headphone jack, 1/8″ (3.5mm) TRS
• Headphone Impedance: 16 Ohm at 25 mW, 32 Ohms at 13 mW with THD+N: 0.02%
• Speaker: Internal 2W mono speaker
• Powered Speaker Output: Stereo consumer line level or powered speaker output, 1/8″ (3.5mm) TRS
• Line Output: Stereo consumer line level or powered speaker output, 1/8″ (3.5mm) TRS
• Line Out/Powered Speaker Output Impedance: 600 Ohm, stereo unbalanced
• Line Input: Pseudo-balanced Line in jack, 1/8″ (3.5mm) TRS
• Line In, Impedance Level: >20k Ohm
• Key/Paddle Input: 1/8″ (3.5mm) TRS
• PTT Input: 1/8″ (3.5mm) TS
• DC Power Connector: Coaxial DC power connector, 2.1mm (AC power supply and power cable included)

Display/Touch Screen

• Display Type: Large 8.0″ In Plane Switching (IPS) display with 10-point touch
• Display Resolution: HD (WXGA 1280 x 800) display resolution

Electrical

• Power: 10-15 VDC
• AC Power Supply: Wall mount AC adapter (included)
• Battery: Optional Lithium-ion battery (see requirements below)

Mounting Capabilities

• Stand: Standard included 30 degree tilt desk stand for optimal viewing
• Feet: Optional removable constant torque tilt hinge feet
• Display Mounting: Optional VESA MIS (100mm)
• RAM® Mount: Optional mounts available

Mechanical

• Height*: 6.75" (17.1 cm)
• Width*: 14" (35.6 cm)
• Depth*: 1.75" (4.5 cm)
• Weight: Approximately 4 lbs. (1.8 kgs)

Battery Requirements

• Maximum Battery Size: 3"W (7.62 cm) x 6"L (15.24 cm) x 0.75"D (1.91 cm)
• Power Connector: USB-A female
• Charging Connector: USB-Micro-B female
• Minimum Current Supply: 2.5A at 5V output
• Auto Start: Preferred feature - initiate start on introduction of a load

Options

• Tilt hinge feet (constant torque)
• Spare Wall mount AC adapter (US & International)
• Spare DC power cable with 2.1mm barrel connector and pigtails
• FlexRadio FHM-1 hand mic with RJ45 connector
• Mic conversion cable for FMH-1-8P (8-pin Foster) to RJ45
• Stylish FlexRadio branded soft side canvas travel case

Specifications subject to change without notice.
* Without tilt hinge feet or fixed tilt stand attached